Coolair 322BP AC SmartSeal 0.20-Oz Syringe With Hose Quick Shot Refrigeration Leak Seal ~ Sara C. Purdy Personal Blog

Coolair 322BP AC SmartSeal 0.20-Oz Syringe With Injection Hose Quick Shot Refrigeration Leak SealSuper concentrate solution SAFE for the User, 100% green product non-flammable. Non-toxic, GUARANTEED permanent sealDose: 0.20 Ounces Treats Systems Up To 6 Tons (21KW, 72,000BTU/H) AC SmartSeal Quick Shot is our newest technology that does not require pumping down of the system. This product is ideal for direct pinhole repairsand the prevention of refrigerant leaks.Ideal for Preventing Refrigerant Leaks or Direct RepairsPermanently Seal Leaks of Refrigerant Gas in AC and Refrigeration systemsCompatible with all RefrigerantsPolymer FreeApproved by OEM'sNot Activated by Oxygen or MoistureNon-clogging of all ComponentsInstructions:1- Turn the A/C system on. If the unit is a heat pump, be sure it is set on cooling mode. Connect the cartridge to Easy Inject and fully inject sealant in it.2- Connect Easy Inject to the low-pressure service port of A/C system. Connect a charging hose to a refrigerant cylinder.3- Briefly open the cylinder valve to purge air out of the charging hose. Quickly tighten the charging hose fitting to Easy Inject. Inject refrigerant through Easy Inject and push sealant into the A/C system.4- Run A/C system for 30 minutes to allow the product to fully circulate.Use Instead Of Leak Freeze Pro 45315, Leak Freeze Pro 45325, Nu-Calgon Easy Inject 4050-08, Nu-Calgon Easy Inject With UV Dye 4050-11, Clip Light 985 Flex Inject Kit Coolair 322BP AC SmartSeal 0.20-Oz Syringe With Hose Quick Shot Refrigeration Leak Seal